Here at Mishimoto, we've decided to expand our line of 2015 STI products. Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto 2015 STI Front-Mount Intercooler Kit will provide your 2015 WRX STI with the ability to make the most horsepower and torque possible. This 2015 STI intercooler kit was designed with the same 28" intercooler as our 2015 WRX front-mount intercooler kit. The massive 3.5" thick core will support up to 600 whp or 30 PSI of boost pressure! Smooth cast end tanks make for uninterrupted airflow through the cooler. This results in an intercooler that provides the best airflow and cooling capabilities without excessive pressure drops. Your fully built rally car will have no problem keeping a dense, cold, intake charge with this highly engineered STI intercooler kit. The Mishimoto 2015 STI front-mount intercooler kit features mandrel-bent aluminum piping for optimum airflow. The STI front-mount intercooler pipe routing maintains your factory fog lights, so you can see on those dark, foggy rally stages. Everything you need is included in the STI front-mount intercooler kit to make for a worry-free installation. No cutting of the front bumper or other modifications are required with the application-specific crash bar that positions the intercooler perfectly in the lower grill of the front bumper where it will receive optimal airflow. The 2015 STI intercooler kit includes two different turbo outlet hoses, just in case you have an upgraded turbo with a larger compressor outlet. And who doesn't want an upgraded turbo? Did I hear a blow-off valve on your car? The STI front-mount kit has that covered too. The piping works with the stock bypass valve or aftermarket blow-off valves! This 2015 STI intercooler is backed by the Mishimoto Lifetime Warranty to ensure superior craftsmanship! Worried that paint reduces performance? Check out our Painted Intercooler Engineering Report to learn how we debunked tha

Here at Mishimoto, we've decided to expand our line of 2015 STI products. Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto 2015 STI Front-Mount Intercooler Kit will provide your 2015 WRX STI with the ability to make the most horsepower and torque possible. This 2015 STI intercooler kit was designed with the same 28" intercooler as our 2015 WRX front-mount intercooler kit. The massive 3.5" thick core will support up to 600 whp or 30 PSI of boost pressure! Smooth cast end tanks make for uninterrupted airflow through the cooler. This results in an intercooler that provides the best airflow and cooling capabilities without excessive pressure drops. Your fully built rally car will have no problem keeping a dense, cold, intake charge with this highly engineered STI intercooler kit. The Mishimoto 2015 STI front-mount intercooler kit features mandrel-bent aluminum piping for optimum airflow. The STI front-mount intercooler pipe routing maintains your factory fog lights, so you can see on those dark, foggy rally stages. Everything you need is included in the STI front-mount intercooler kit to make for a worry-free installation. No cutting of the front bumper or other modifications are required with the application-specific crash bar that positions the intercooler perfectly in the lower grill of the front bumper where it will receive optimal airflow. The 2015 STI intercooler kit includes two different turbo outlet hoses, just in case you have an upgraded turbo with a larger compressor outlet. And who doesn't want an upgraded turbo? Did I hear a blow-off valve on your car? The STI front-mount kit has that covered too. The piping works with the stock bypass valve or aftermarket blow-off valves! This 2015 STI intercooler is backed by the Mishimoto Lifetime Warranty to ensure superior craftsmanship! Worried that paint reduces performance? Check out our Painted Intercooler Engineering Report to learn how we debunked tha

Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX STI front-mount intercooler kit will provide your Subaru with the ability to make the most horsepower and torque possible. This front-mount intercooler was designed with a large, 28" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat exchange properties for those time-attack laps, or a 10-second blast down the quarter mile.

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This intercooler is a direct-fit unit requires no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. As with all our products, the Mishimoto Mustang EcoBoost Performance Intercooler includes the Mishimoto Lifetime Warranty.

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58-percent increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in internal core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5inin hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. The precision CNC-machined BPV flange allows you to retain the stock BPV.

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58-percent increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in internal core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5inin hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power.

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58-percent increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in internal core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5inin hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power.

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire intercooler system at one time! This intercooler is a direct-fit unit and features a 58-percent increase in core size while requiring no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in internal core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. This kit features 2.5inin hot-side and 2.75in cold-side mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. The precision CNC-machined BPV flange allows you to retain the stock BPV.

For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This intercooler is a direct-fit unit requires no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25-percent increase in core volume and 165-percent increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. As with all our products, the Mishimoto Mustang EcoBoost Performance Intercooler includes the Mishimoto Lifetime Warranty.

The Mishimoto aluminum Evo intercooler designed for the Mitsubishi Evo 7, 8, and 9 is the perfect bolt-on upgrade for your stock Evo intercooler.Crafted using TIG welded, high-quality aluminum, the Mitsubishi Evo intercooler is designed to provide added horsepower through improved cooling efficiency.Test runs on the dyno resulted in a 24.5 horsepower increase versus the stock intercooler setup.

OEM intercooler setups are not designed to handle the higher levels of boost that come with modifying your turbocharged vehicle.The Mishimoto intercooler and piping kit is designed as an ideal upgrade for the 2010-2012 Hyundai Genesis Coupe 2.0T intercooler.The intercooler and piping kit reduces intake temperatures and increases overall cooling efficiency, resulting in a safe increase in horsepower.Unlike most other aftermarket intercooler kits available, modifications to the front bumper and removal of the crash bar are not necessary, since our kit retains OEM fitment.Included in this comprehensive kit is a polished aluminum or black bar and plate style Z Line intercooler, a complete set of aluminum charge piping, along with all t-bolt clamps and silicone couplers needed for direct bolt-on installation.The Mishimoto Hyundai Genesis Coupe intercooler and piping kit will fit with the OEM radiator, as well as the Mishimoto Hyundai Genesis Aluminum Radiator.Note: For your taste, only one side of the intercooler has the Mishimoto logo.

OEM intercooler setups are not designed to handle the higher levels of boost that come with modifying your turbocharged vehicle.The Mishimoto intercooler and piping kit is designed as an ideal upgrade for the 2010-2012 Hyundai Genesis Coupe 2.0T intercooler.The intercooler and piping kit reduces intake temperatures and increases overall cooling efficiency, resulting in a safe increase in horsepower.Unlike most other aftermarket intercooler kits available, modifications to the front bumper and removal of the crash bar are not necessary, since our kit retains OEM fitment.Included in this comprehensive kit is a polished aluminum, black, or gold bar and plate style Z Line intercooler, a complete set of aluminum charge piping, along with all t-bolt clamps and silicone couplers needed for direct bolt-on installation.The Mishimoto Hyundai Genesis Coupe intercooler and piping kit will fit with the OEM radiator, as well as the Mishimoto Hyundai Genesis Aluminum Radiator.Note: For your taste, only one side of the intercooler has the Mishimoto logo.